Grooved End Butterfly Valve

Name: Grooved End Butterfly Valve
Brand: Euro Flow Control
SKU: EFC-284

Datasheet

Download datasheet (PDF)

Specifications are indicative. Final specification is confirmed at quotation.

Specifications

Confirmed at quote

Size Range: DN50 to DN300
Pressure Class: PN10, PN16
End connection: Grooved
Operating temperature: max 120°C

Standards

Design & manufacture: MSS SP-67, API 609, EN 593
Inspection & test: API 598
Face to face: ISO 5752 series 20, BS 5155
Flange & end dimension: DIN PN10/16/25, ANSI B 16.1, BS 4504, ISO PN10/16, JIS B 2212/2213, BS 10 table D, BS 10 table E
Mounting: ISO 5211

Configure your variant(manually adjust box on the right if you require a different spec)

Size
Pressure
End connection

Materials

All available material options per part. Click a pill to set it in the configurator.

Body
Disc
Seat
Stem
Shaft
Pin

Operating media

Fresh waterSewageSea waterAirVapourOilsAlkalis

Typical applications

HVAC
Fire protection
Water distribution

Actuation options

Manual leverManual gearboxPneumatic single-actingElectric 230V AC

Approvals

ECM (Ente Certificazione Macchine)ISOEACCE

Features

Grooved connection for assembly without flanged joints or welding
Resilient seat for tight sealing and corrosion resistance
Lightweight body
Low-torque operation
Suitable for isolation and throttling service
Compatible with standard grooved pipe fittings
Grooved-end (Victaulic-type) pipe connections
Available with handwheel gear operator
Available with lever operator with position indicator and tamper-evident feature
Available with supervisory switch / tamper switch
Yellow open/closed position indicator on gear-operated variants
Available in red-painted (fire protection) and blue-painted (general service) versions
Stem with groove for supervisory switch integration
DN50 to DN300 size range

Description

A grooved-end butterfly valve designed for isolation and throttling service. The valve uses a grooved connection for assembly without flanged joints or welding, incorporating a resilient seat for sealing and corrosion resistance. Compatible with standard grooved pipe fittings and supports manual or actuator-driven operation.

Selection notes

This butterfly valve is a grooved end pattern, supplied for grooved installation.

Sizes run DN50 to DN300, in PN10, PN16.

The body is DI.

Seat and trim options are EPDM. The seat, not the body, usually sets the temperature and medium limit, so confirm it against the service before ordering.

Stated service media include fresh water, sewage, sea water, air, vapour and oils.

It is catalogued for Water & Wastewater and HVAC.

Working temperature is max 120°C.

Built to MSS SP-67, API609, EN593, ISO5752 series 20 and BS5155.