Hydraulic Lug Butterfly Valve

Name: Hydraulic Lug Butterfly Valve
Brand: Euro Flow Control
SKU: EFC-286

Datasheet

Download datasheet (PDF)

Specifications are indicative. Final specification is confirmed at quotation.

Specifications

Confirmed at quote

Size Range: DN900 to DN1000
Pressure Class: PN10, PN16
End connection: Lug
Operating temperature: -10°C to 120°C

Standards

Design & manufacture: ANSI B16.10, BS 5152

Configure your variant(manually adjust box on the right if you require a different spec)

Size
Pressure
End connection

Materials

All available material options per part. Click a pill to set it in the configurator.

Body
Disc
Seat
Shaft
Bushing
O-Ring
Fixed Card Board

Dimensions per size(2 sizes)

Size	C (mm)	PN10_D1 (mm)	PN10_n-M	Weight
DN900	203	1050	28-M30	—
DN1000	216	1160	28-M33	—

Operating media

ChemicalsAirWaterSteamOilSalts

Typical applications

Large-scale pipelines
Municipal water treatment
Industrial fluid handling
Pump stations
Water distribution networks

Actuation options

Hydraulic

Coatings

Epoxy painting

Approvals

ECM – Ente Certificazione MacchineISOEAC (Eurasian Conformity)CE marking

Features

Compact structure
Quick response
Suitable for automation
Corrosion-resistant materials
Compatible with clean or lightly contaminated water applications
Triple-offset / double-offset lug-type butterfly valve body
Hydraulic cylinder actuator (double-acting) with hydraulic hose connections
Solenoid valve mounted on actuator
Flow control valve mounted on actuator
Proximity sensor for end-position detection
Parts numbered 1-8 on sectional diagram: (1) lower stem/bottom bearing, (2) body/seat area, (3) disc, (4) seat/seal ring, (5) upper stem bearing, (6) stem, (7) actuator bracket/yoke, (8) hydraulic cylinder
Lugged body with through-bolting arrangement (n-M bolt pattern)
Bore diameter referenced as ØD1 on drawing
Face-to-face dimension referenced as C on drawing

Description

A lug-type butterfly valve actuated by a hydraulic actuator, designed for medium-pressure water systems and industrial fluid handling applications. The body and disc are fabricated from carbon steel with epoxy coating, fitted with an EPDM seat and stainless steel shaft. Available in DN900 and DN1000 sizes to PN10/PN16 pressure ratings.

Selection notes

This butterfly valve is a lug type and hydraulic actuated pattern, supplied for lug installation.

Sizes run DN900 to DN1000, in PN10, PN16.

The body is S235JR + EPOXY PAINTING.

Seat and trim options are EPDM. The seat, not the body, usually sets the temperature and medium limit, so confirm it against the service before ordering.

Stated service media include chemicals, air, water, steam, oil and salts.

It is catalogued for Water & Wastewater and Industrial Process.

Working temperature is -10°C to 120°C.

Built to ANSI B16.10 and BS 5152.